Smaller line of engine blocks

Our smaller line of engine blocks are built by LIEBHERR. 
LIEBHERR is a very experieced builder of Diesel and Gas engines. With the second generation of Gas Engines LIEBHERR provides a series of highly efficient combustion engines.
In the range up to Pel=570kW Tech 3 Solutions builds the CHP Systems by packaging all relevant Subsystems. The smallest unit has a electic output power of Pel=150kW which is driven by the G944, 4 Cylinder, 4 Valve internal combustion engine. The largest module is the G9512 which is a V12, 4 Valve internal combustion unit.

Every CHP consits of a Combustion Engine, Synchronous Generator, full heat recovery, plate heat exchanger for heating loop and waste heat loop and the full automatic Genset controller.

Due to the situation on the worksite, the CHP can be equipped with a sound enclosure for indoor use or build into a container which is one solution if no adequate building is available. For the operation of multiple CHPs into a seperate building is the first choice. 

 

The range of these lean burn and turbocharged engines as following:

G 944     4 Cylinder, 4 valve - Pel=150kW...180kW
G 946     6 Cylinder, 4 valve - Pel=220kW...270kW
G 9508   8 Cylinder, 4 valve - Pel=300kW...380kW
G 9512 12 Cylinder, 4 valve - Pel=450kW...570kW
 
 

 

Products

G6-150kW

CHP Foxlake
CHP East Pennsboro

In this category Tech 3 Solutions builds the CHP Systems by packaging all relevant Subsystems. This work is done in the Facility in Greenville, South Carolina by our experienced Engineers and Technicians and Master Welders.

G8-280kW

In this category Tech 3 Solutions builds the CHP Systems by packaging all relevant Subsystems. This work is done in the Facility in Greenville, South Carolina by our experienced Engineers and Technicians and Master Welders.